| Title | Description | Published | Added |
| Do You Know How To Pray-Part II | One of Jesus' disciples asked Him a profound question in Luke 11: "Lord, teach us how to pray."In light of the times we are living in, we must know how to use the greatest lifeline God has given to us as humans...Prayer?? It is a powerful tool that can influence government, nations, and individual circumstances!Prayer is not for emergency use only, when we get in a pinch and need someone to bail us out. Prayer is not an \"Aladdin's Lamp\" or a trip to the wishing well for our wants. Prayer is for everyday living, moment by moment. Prayer is a means of claiming God's promises and knowing and becoming abandoned to God's will.Unfortunately, many today do not use this powerful lifeline and neither do they know how it works. Join me in the next two episodes as I share what is prayer, what are the various types of prayer, and how to effectively pray.Websitehttp://nadinearaphael.comYoutubehttps://www.youtube.com/channel/UCZEf9__Cp9_EkKwmPKS0cYQ?view_as=subscriberNadine's Memoir book: But God ; | 2020 | 2021-06-01T08:22:17Z |
| Patna High Court - BRHC010075272008 (2008-12-12) | HIGH COURT OF JUDICATURE AT PATNA Cr.Misc. No.45341 of 2008 1. MD.MUSTAQUE 2. MD. GAFFAR BOTH SONS OF MOHAMMAD @ BHUTTO, R/V MILKY, P.S. BIHPUR, DISTRICT BHAGALPUR--------------------PETITIONER. Versus STATE OF BIHAR-------------------OPPOSITE PARTY. For the Petitioners : Mr. Rajan Kr. Jha, Mirrored from https://github.com/vanga/indian-high-court-judgments | 2008 | 2025-11-19T08:28:03Z |
| Patna High Court - BRHC010098522005 (2008-07-15) | HIGH COURT OF JUDICATURE AT PATNA Cr.Misc. No.27082 of 2005 MEENA DEVI Versus STATE OF BIHAR & ORS ----------- 8 15 July 2008 Heard learned counsel for the petitioner and learned counsel for the O. P. no.2. This application has been filed for quashing the order dated 30.5.05 passed by learned Mirrored from https://github.com/vanga/indian-high-court-judgments | 2008 | 2025-11-19T14:45:03Z |
| Patna High Court - BRHC010100572008 (2008-12-22) | HIGH COURT OF JUDICATURE AT PATNA Cr.Misc. No.36530 of 2008 CHHATHU MISTRI @ SINGH @ DHANANJAY SINGH, Son of Har Govind Singh, resident of Village- Naya Tola, Naugachiya, P.S.- Naugachiya, District- Bhagalpur :-----Petitioner. Versus STATE OF BIHAR:-------Opposite Party ----------- For the Mirrored from https://github.com/vanga/indian-high-court-judgments | 2008 | 2025-11-19T15:20:16Z |
| Patna High Court - BRHC010074212008 (2008-05-09) | HIGH COURT OF JUDICATURE AT PATNA Cr.Misc. No.6093 of 2008 SANJAY BARNWAL Versus THE STATE OF BIHAR ----------- 3 9.5.2008 KHAN Heard counsel for the petitioner and the State. The petitioner is an accused in a case under section 302/34 of the Penal Code. It is alleged by the informant that while Mirrored from https://github.com/vanga/indian-high-court-judgments | 2008 | 2025-11-19T08:09:45Z |
| High Court Of Rajasthan - RJHC010008492006 (2007-05-11) | Sales Tax Revision No.478/2006 M/s. Maheshwari Minerals & Chemicals. vs. Assistant Commercial Taxes Officer, Udaipur. 2. S.B. Civil Sales Tax Revision No.486/2006 M/s. Maheshwari Minerals & Chemicals. vs. Assistant Commercial Taxes Officer, Udaipur. 3. S.B. Civil Sales Tax Revision Mirrored from https://github.com/vanga/indian-high-court-judgments | 2007 | 2025-11-16T16:21:18Z |
| Patna High Court - BRHC010102892008 (2008-08-04) | HIGH COURT OF JUDICATURE AT PATNA Cr.Misc. No.28825 of 2008 SHYAM SUNDER CHAUHAN Versus STATE OF BIHAR 2 4.8.2008 Heard. The petitioner is named in the F.I.R. in a case under section 302 /34 IPC and 27 of the Arms Act. Initially, story was that the petitioner and another accused Bhola Chauhan took Mirrored from https://github.com/vanga/indian-high-court-judgments | 2008 | 2025-11-19T15:56:11Z |
| Críostóir Mórdha Favorites | Críostóir Mórdha Favorites | | 2025-05-25T08:42:47Z |
| 20190501 Eli Richey | Eli Richey | | 2019-08-27T03:22:59Z |
| /cr/elements | PURL domain: /cr/elements | | 2016-08-03T05:45:06Z |
| Luana R Favorites | Luana R Favorites | | 2022-07-22T19:11:09Z |
| Giovanni CR Favorites | Giovanni CR Favorites | | 2020-08-16T02:57:11Z |
| High Court of Punjab and Haryana - PHHC010027822007 (2007-02-26) | No. 1039 of 2007 1 .. IN THE HIGH COURT OF PUNJAB & HARYANA AT CHANDIGARH. Civil Revision No. 1039 of 2007 O&M) Date of Decision : February 26, 2007 Smt. Krishna Devi ... Petitioner. Versus Smt. Prem Devi and others .. Respondents CORAM : Hon`ble Mr. Justice Pritam Pal. Present : Shri Mirrored from https://github.com/vanga/indian-high-court-judgments | 2007 | 2025-11-13T10:37:13Z |
| Crèche Le Paradis Des Anges Favorites | Crèche Le Paradis Des Anges Favorites | | 2021-10-31T06:24:41Z |
| Brown, Keith, 23 cr 197 BAH (ECF No. 7 Order) | Brown, Keith, 23 cr 197 BAH (ECF No. 7 Order) | | 2026-01-07T18:00:09Z |
| Saint Vincent's - Old Spanish Days (Fiesta) | Please visit the California Revealed website to see the most complete and up-to-date version of this object: https://californiarevealed.org/node/567279 . // Slide is discolored. // This slide depicts the procession of the parade during Santa Barbara’s annual Old Spanish Days (Fiesta) celebration. A large replica of a (Spanish armada) ship is seen in the center of the slide. Established in 1858 as an orphanage and school by the Daughters of Charity of Saint Vincent de Paul, St. Vincent's is the longest running charitable institution in Santa Barbara, California. They opened the first infirmary for children in Santa Barbara in 1873, created one of California's first childcare programs to help working women in 1918, and operated a residential program and school for children with developmental disabilities from 1936 to 1985. These slides capture candid scenes of charitable work as well as moments of daily life, travel throughout California and the US, and recreational activities of the ; | 1949 | 2025-10-19T20:56:47Z |
| Saint Vincent's Day Nursery | Please visit the California Revealed website to see the most complete and up-to-date version of this object: https://californiarevealed.org/node/567344 . // This slide depicts a Daughter of Charity taking a stroll with two children on a street in the vicinity of Saint Vincent's Day Nursery (220 West Canon Perdido Street). Established in 1858 as an orphanage and school by the Daughters of Charity of Saint Vincent de Paul, St. Vincent's is the longest running charitable institution in Santa Barbara, California. They opened the first infirmary for children in Santa Barbara in 1873, created one of California's first childcare programs to help working women in 1918, and operated a residential program and school for children with developmental disabilities from 1936 to 1985. These slides capture candid scenes of charitable work as well as moments of daily life, travel throughout California and the US, and recreational activities of the Daughters of Charity and the people they served from 19; | | 2025-10-19T23:19:33Z |
| SIM Microfilm Canister of IA40313204-18 Raw Scan | Raw Scan images of a Canister of the Sim Collection: https://archive.org/details/SerialsOnMicrofilmCollection Archival backup. See Sim collection: https://archive.org/details/sim_microfilm All the issues from this canister | | 2022-08-10T08:58:19Z |
| Letty C. R. Favorites | Letty C. R. Favorites | | 2016-09-24T13:55:03Z |
| Techno-economic study on the reduction measures, based on best available techniques of emissions (water, wastes, air) from the paper and board manufacturing industry : document | 1 v. (various pagings) : 30 cm // At head of title: European Commission // "January 17, 1994"--P. iii // "CR-92-95-780-EN-C"--P. [4] of cover | 1996 | 2024-07-08T16:51:51Z |
| Synchronized Inverted Vertical Motors for CR-10 (S) with adjustable stabilizer for Z axis CR-10S. 100% printable including threaded rod (2843598) | MAJ 07/10/2018: Added a wire feed that snaps onto the threaded rod to prevent unwinding of new reels. MAJ 06/05/2018: Addition to the stepper support of the adjustable stabilizer of the Z axis MAJ 03/29/2018: error on the belt tensioner stl Reverse(?! suggestion welcome :) ) Vertical mounting system for CR-10 (S) motors with steppers synchronization option and Z adjustable stabilizer. the size of the step of the printable threaded rod is M22x200. Or 2mm per revolution for an outside diameter of 22mm. This set makes it possible to adjust the geometry of the Z axis by adjusting the length of the threaded rod. To do this, it is necessary to act on the adjusting ring and lock the position with the counter nuts Allows the use of powerful stepper (photo: NEMA17x60mm) Stepper synchronization dispenses repeated heating bed settings Attention : You will have to reverse the direction of the Z axis stepper in the configuration_h (line 753 for Marlin 1.1.8) section of your firmware ! Material : - ; | 2018 | 2021-01-19T06:20:58Z |
| CR_Archive Favorites | CR_Archive Favorites | | 2025-03-22T15:53:14Z |
| CR-10 Filament Slip Fix - Modified (3014190) | I felt that there was an excess amount of tension from the filament slip fix, but too little with the original spring, so i met in the middle. | 2018 | 2021-01-21T01:05:48Z |
| Rock Solid Upgrade for Stock Fans CR-10 (3026394) | I have remixed this thing form Searchworlds thing number 2766873. Great design from them, and I just modified it to suit my setup. For some reason I could not post this as a remix. | 2018 | 2021-04-19T22:10:04Z |
| boitier-cr10 10 (2896197) | boîtier d'extension porte lecteur de carte SD porte outils porte raspberry pi | 2018 | 2021-06-10T11:48:01Z |
| LED light for petsfang Tornado/CR-10/Ender 3 (3281776) | These are two LED modules that house 2 and 4 LEDs for the petsfang cooling duct. https://www.thingiverse.com/thing:2759439 One goes under the 5015 fan and one goes under the 4010 fan. You can use either. If you print the lower 2 LED module, make sure you print it in PETG or ABS as it is close to the hotend. The upper one can be printed in PLA. The wiring for the lower module goes to the right and through the duct for the 4010 wiring. The wiring for the upper part goes under the fang and above the 4010 to the back. I wired them to the hotend fan, so they turn on at 50 degrees on my Tornado and turn off at 50 degrees. | 2018 | 2021-03-03T18:16:32Z |
| A Better X Bracket (3553245) | Hello, I have seen a few of these here but none that I liked. So I made these and made a Ender 2 style printer to test and see how well it holds up. I could add a second rail and second Z rod but it holds the rail with no wobble and it prints nice. Besides this is a worse case test. Prints are even better than my CR-10 Pro or Ender 3 Pro. I thought that I would post it here in case anyone wishes to have them. Please print with 50 to 90 infill. The stronger the part the better. Clamping down with the screws will crush a low infill and may pull the axis out of alignment. This test printer was made with a MKS Base v1.5 board and a 3.2 TFT touch screen. I placed the Extruder on the top 2020 rail above the 2040 Z extrusion. This made the X axis lighter and greatly improved printing. With the lighter rails I can print faster without any ringing or wobbling in the prints. I do hope you enjoy the parts and if you are building a printer from scratch this is a good start with a few other part he; | 2019 | 2021-03-05T19:37:58Z |
| Wifes Name Plate (3396670) | Customized version of https://www.thingiverse.com/thing:3395463 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3395463 | 2019 | 2021-03-17T19:31:08Z |
| Locking Clips CREALITY CR 10 (3922023) | :P | 2019 | 2021-03-25T18:09:39Z |
| Remix of Pen/Pencil/Marker mount for Creality Ender 3 / CR-20 (3889541) | The holder was not stable enough for my pencil so I remixed it Youtube: https://youtu.be/qSM0Cn8Swvg It would be nice if you post your make. Thank you There are lots of informations in the web how to draw with the ender. Usefull is for example https://www.instructables.com/id/Draw-With-Your-3D-Printer-Plotter/?utm_source=newsletter&utm_medium=email | 2019 | 2021-03-25T11:32:33Z |
| THOR'S HAMMER MOLD (3804425) | Summary MOLD FOR THOR'S CONCRETE HAMMER Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: SMART MATERIALS PLA - | 2019 | 2021-06-11T20:07:32Z |
| CR 2032 watch cell x4 box with sliding lid (3700578) | There are many CR2032 boxes on Thingiverse, but they're mostly for keeping a tray of them in the house. I wanted something small and portable to carry on my bike for a handful of spares. Buggi's CR2032 case was very close to what I wanted, but the feature to hold the lid in is an unsupported overhang, albeit small, so I redesigned the part in Solidworks. By giving the lid a 45 degree bend that conforms to the shape of the cells, I could remove overhangs, make it smaller overall, and make the design visually more interesting. I've also expanded the box to fit four cells. | 2019 | 2021-03-22T04:56:10Z |
| Creating Spiralized Vases using Blender (3702476) | Quick little inforgraphic/guide on creating spiralized vases for Blender beginners. Direct link to the full res tutorial image: http://chry.me/3d_printing/vases/vase_tutorial_final.jpg Any Blender version will do, I use v2.79.6 in the demo but using an older or newer version should work the same. Feel free to ask for help in the comment section. I've included the demo vase I made for the thumbnail as a printable .stl Update: Printed the demo vase myself on my CR-10 Mini and it came out great, even without any adhesives on the glass bed. Added a photo to the gallery. Enjoy! | 2019 | 2021-03-22T05:18:06Z |
| Countersink Bits Holder (3745871) | A simple holder for countersinks. The diameters for what each countersink is usable is written on the base. The diameters for the shafts are 6, 8, 10 and 12 mm. I made this stand for these countersinks: https://www.amazon.de/Querlochsenker-Malayas%C2%AE4-Entgratsenker-Kegelsenker-Entgratung/dp/B01G7ZQ078/ref=cm_cr_arp_d_product_top?ie=UTF8 But i think any other brand will work also. If you have any suggestions or wishes, please let me know. | 2019 | 2021-03-22T15:23:46Z |
| CR-10 X-axis sprocket cover (3173972) | Remix to add slot relief for X-stop micro switch PCB and to get a better fit. | 2018 | 2021-03-16T23:58:18Z |
| Surprised Pikachu (3240671) | Surprised Pikachu meme Scale as desired. ~60% X,Y (45mm) and 100% Z (3.4mm) in photo. Printed on single-extruder CR-10 and paused for filament change using Cura. Layers: 1. White (1mm) 2. Black (2mm) 3. Gold (3mm) 4. Red (3.4mm) I take no credit for the Pikachu artwork. | 2018 | 2021-03-03T06:10:04Z |
| Vallejo air paint rack V3 - 36 bottles (extendable) (3450309) | Summary Hello everyone! Sorry for taking the file down, but it´s back and it´s better! With the V3.0 the rack is connecting really smooth with no need of any sanding on the hooks and now not only you can extend it sideways but up too! i designed a very simple but useful connector, so pleeeease, enjoy it and don´t forget to like it! And off course, any 1.000.000 dollars tips are more than welcome! :D Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Infill: 100% | 2019 | 2021-06-11T15:11:42Z |
| CR-10 Cooling Cap (3267968) | This is an update to my original design , to adjust for the slightly annoying sound that can come from the fans that were mounted square to the direction of the X-movement. This designs leans the fans at 30 degrees and they are less likely to vibrate. check at the first design with the update for mounting instructions, please https://www.thingiverse.com/thing:2936032 | 2018 | 2021-03-03T15:48:13Z |
| HeadphoneStand Simple (2853306) | Summary Hi @ all. I designed this very simple Headphonestand without any logo or anything else. Print Settings Printer Brand: Creality Printer: CR-10 Mini Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 30% Notes: I´ve printed this wonderfull Headphonestand with PLA. Overview and Background | 2018 | 2021-06-12T05:11:10Z |
| Easter Egg for your best friend (2853621) | Summary Подари своему лучшему другу. Give it to your best friend. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 20% | 2018 | 2021-06-11T17:52:42Z |
| Paving in Progress - CR 210 from Greenbriar Rd. to Cimarrone Blvd. | 🚧Paving in Progress 🚧 - October 2025 Paving is underway on CR 210 from Greenbriar Rd. to Cimarrone Blvd. The CR 210 widening project is on track for completion in Summer 2026. Learn more about all of great work going on throughout the County by checking out our Featured Projects Page a www.sjcfl.us #MySJCFL #PublicWorksAtWork #Shorts | 2025 | 2025-10-30T18:35:46Z |
| Camille Crépon Favorites | Camille Crépon Favorites | | 2024-08-17T11:25:07Z |
| Nichols, Ryan, 21 cr 117 (12 20 21 hearing) | Nichols, Ryan, 21 cr 117 (12 20 21 hearing) | | 2026-01-13T09:28:17Z |
| CR-10 V2 / V3 Silent Fan Base 2 x 120 (5182050) | 2 x 120mm Fan 4 x M3 x 30 2 x M3 x15 1x LM2596S LED | 2022 | 2022-01-19T06:42:37Z |
| Ender 3 / CR-10 Snap On Led Strip Mount (5281272) | I got annoyed by bad variety of Led strip mounts for Ender 3 so I made my own. No screw, just simply snap it in. Cable to strip can be hidden underneath hotend housing. I used 2835 240 leds/m white led strip (link in comments). Printed in PLA. No supports needed. **Free download here: https://www.prusaprinters.org/prints/12879-ender-3-cr-10-snap-on-led-strip-mount** If you like my design you can tip me, follow me or check out my other designs. Cheers! Luke | 2022 | 2022-04-19T21:20:36Z |
| Mosquito Micro-Swiss direct-drive adapter (5615505) | This is a remix from https://www.thingiverse.com/thing:3534197/files I simply adapted the parts to fit a Micro-Swiss direct drive with linear rail mounting block (CR-10 V3 and probably Ender 3 as well). I've included another file for the Micro-Swiss wheel block version (the negative part is smaller than the linear rail version). Monoblock version which offer much more rigidity than if the parts were separated. The Mosquito adapter uses the protruding aluminium part of the mounting block to have more strenght (negative part cover the protruding part). I've adapted the BL Touch support block to allow enough clearance to have something around 1.5 to 2.0 mm of Z-Offset. On the fan adapter, I've simply added a hook to attach your wires using a tie-wrap. You'll need to drill the central hole where the Capricorn fitting goes in order to be able to screw it into the adapter (using pliers and pushing down). | 2022 | 2023-01-18T03:00:48Z |
| Win 10 1709 RS 3 Fa Cr Up 16299.15 RT AI De 2017 | 1 | | 2018-02-01T01:12:51Z |
| Confluence of Wenas Cr. & Yakima R., WA (636356) | This is a 1:50,000 scale model of the 6 kilometer square area having it's center point at the confluence of Wenas Creek and the West shore of the Yakima River in Washington state. Real World: Center Point: Lat: 46° 41' 42.2247" N Lon: 120° 29' 27.0095" W Altitude of Center Point: 1134.946 feet above mean sea level Size: 6km square area Lowest elevation: 1102 feet Highest elevation: 2020.6 feet Model: Size: 120mm square. 22mm at highest point Scale: 1:50,000 Vertical Exaggeration: None Base thickness below lowest elevation of area: 4mm Altitude of bottom surface of model: 446 feet above mean sea level. | 2015 | 2021-04-12T08:55:07Z |
| CR10S V3 LED Light Bar Brackets (5161597) | I had moved my 3D printer into my office and the natural light wasn't very good . I found it impossible to see what was going on without a flashlight . So i decided to add a LED light strip to the cross bar. It goes up and down with the extruder frame , it's really easy to see now. I have downloaded a few print files from this site to learn how to use my printer, and now would like to share one of my own . | 2021 | 2021-12-14T05:47:01Z |
| Xavier Cr. Lopez Favorites | Xavier Cr. Lopez Favorites | | 2016-10-25T07:00:25Z |